To adjust the direction of the low beam beam, there are two screws with plastic handles on the back wall of each headlight unit. The screws allow you to change the direction of the light beam in the horizontal and vertical planes. The headlights are equipped with a hydraulic corrector of the direction of the light flow, allowing you to change the direction of the light beam in the vertical plane from the passenger compartment in accordance with the vehicle load.
![Headlights: 1 - headlight; 2 - front turn signal; 3 - Fog light [Installed on some vehicles]](https://www.vazbook.ru/img/vaz_2115/1272.jpg)
Headlights: 1 - headlight; 2 - front turn signal; 3 - Fog light [Installed on some vehicles]
The front turn signals with orange diffusers are mounted on the outer sides of the headlights. The turn signals are duplicated by side turn signals (repeaters), mounted on the front fenders.
Some cars are equipped with fog lights that are mounted in the niches of the front bumper. On a car that is not equipped with fog lights, the bumper does not have a hole for fog lights.
The car is equipped with combined rear lights. Each light consists of four sections: a turn signal with an orange diffuser, a brake signal and a side light with a red diffuser, a reversing light section with a colorless diffuser, and a fog light section with a red diffuser. A red reflector is also built into the light.
Rear lights: 1 - additional brake light; 2 - fog light section; 3 - Reverse light section; 4 - brake light and side light sections; 5 - rear direction indicator section
There is a light fitting on the ceiling of the passenger compartment. It turns on automatically when any of the side doors is opened (limit switches installed in doorways) or forced by pressing the diffuser of the lamp. The rear number plate is illuminated by two lamps. The glove compartment illumination lamp lights up when the outside lighting is on and the glove compartment lid is open.
The vehicle is equipped with one vibration-type sound signal.