Table 9.1.1. Basic data for monitoring, adjustment and maintenance
|
Working stroke of the clutch pedal, when adjusted, mm |
125-135 |
|
Permissible increase in the working stroke of the clutch pedal during vehicle operation, no more than, mm |
160 |
|
Permissible runout of driven disk linings, no more than, mm |
0,5 |
|
Minimum distance between the working surface of the driven disk linings and their fastening rivets, mm |
0,2 |
Table 9.1.2. Tightening torques for threaded connections
|
Name of units and parts |
Thread |
Tightening torque, Nm (kgf·m) |
|
Clutch basket to flywheel mounting bolts |
M8 |
19,1-30,9 (2,0-3,2) |
|
Nuts securing the clutch cable to the bracket |
M12 |
14,7-19,6 (1,5-2,0) |
|
Clutch housing to engine block mounting bolts |
M12x1.25 |
54,2-87,6 (5,5-8,9) |
|
Nut securing the clutch housing to the engine cylinder block |
M12x1.25 |
54,2-87,6 (5,5-8,9) |
|
Gearbox to clutch housing mounting nuts |
M8 |
15,7-25,5 (1,6-2,6) |
|
Release bearing bushing mounting bolts |
M6 |
3,8-6,2 (0,4-0,6) |
|
Bolts securing the lower cover to the clutch housing |
M6 |
3,8-6,2 (0,4-0,6) |