Rear view mirrors
To manually adjust the position of the outside mirror, move the hinge lever installed in the mirror support in the desired direction.
1.12. Exterior mirror control units
1.12. Control units for exterior mirrors: a — with button; b - with a button and a slider; 1 - mirror selection mark; 2, 5 - keys; 3 - alarms; 4 - mirror selection engine
If the vehicle is equipped with power mirrors, floor tunnel lining a mirror control unit is installed (Fig. 1.12), which can be made in two control element versions: with one button (fig. 1.12, a) or with a button and a slider (fig. 1.12, b).
To select the optimal position of the mirror with the key block, sequentially tilt key 2 (see Fig. 1.12, a) in the directions indicated by the arrow, and to select the adjustable mirror, rotate the key 90° around its axis. The adjustable mirror is determined by the direction of mark 1.
Note: Since the button has only two fixed positions, when the ignition is on, the electric drive of one of the mirrors is constantly under voltage.
To select an adjustable mirror with the second version of the unit, move the slider 4 in the desired direction (see fig. 1.12, b), and to adjust, press the edges of key 5 in the places indicated by arrows. In the extreme positions of the engine, the power supply circuit of the left (letter "L") or right (letter "R") mirrors is switched on and the corresponding indicator 3 lights up. In the middle position of the engine, the electric drive of the mirrors is switched off.
Position of the interior mirror
The position of the interior rearview mirror is adjusted by turning it in the desired direction on the bracket hinge. To prevent blinding by the headlights of vehicles moving behind, its position can be changed by turning the reflective element support lever.