Contents: Disassembly ↓ Installation ↓
Disassembly
1. Prepare the vehicle for operations (see "Preparing a car for maintenance and repair").
2. Remove the front seat (see above "Front seat - removal and installation").
3. Move the guide along the outer runners to the front of the seat.
4. Using pliers, remove the travel lock of the screw that adjusts the tilt of the seat back from the hole in the rod.
5. Holding the rod, unscrew the screw from it.
6. With a socket wrench by 8 mm we unscrew the bolt of the rear fastening of the outer runners.
7. Move the guide along the runners to the back of the seat.
8. Hold the rod and guide with your hand and use a socket wrench by 8 mm unscrew the bolt of the front runners mount.
9. Remove the outer slides together with the guide, removing the spring hook from the hole in the slides.
10. With a socket wrench by 8 mm we unscrew the two bolts securing the inner runners and remove them together with the guide.
Installation
1. Clean off dirt and apply plastic lubricant to the rubbing parts.
2. Installation of the front seat adjustment mechanisms is performed in the reverse order.