Rear axle of cars VAZ-2105

All articles on the device and repair of the rear axle, final drive, differential and axle shafts of the VAZ-2105 Zhiguli.

The device of the main transmission, differential and axle shafts
The rear axles of VAZ cars have the same design and are unified. They differ from each other in the gear ratio of the main gear, which is 4.3 and 4.44 for the VAZ-2104 models;...

Possible malfunctions of the main transmission
Possible malfunctions of the main transmission, differential and axle shafts, their causes and methods of elimination are given in the table.

Removal and installation the rear axle
Remove the rear wheels and brake drums. Disconnect the brake hose from the pipeline attached to the axle, plugging the holes in the hose and pipeline. Unscrew the bolts securing...

Disassembly and assembly of the rear axle
Before disassembling, remove the pipeline with the brake system tee from the axle beam, install the axle on a repair stand and drain the oil from the crankcase. After removing the...

Checking and straightening the rear axle beam
Examination Be sure to do this if you are repairing a car that has suffered an accident. A deformed beam can cause overloads and noise in the rear axle. Check the beam in both...

Removal, installation, inspection, disassembly and assembly of axle shafts
Removal and installation See section " Disassembly and assembly of the rear axle ". After installation, check the operation of the axle shafts under road conditions. Checking the...

Measuring the axial free play of the axle shaft on a vehicle
To perform this operation, loosen the rear wheel mounting bolts, place chocks under the front wheels and lift the rear axle. Release the parking brake and set the gearshift lever...

Determining gearbox faults on a vehicle
The cause of noise in the rear axle can be determined by the following tests. Test 1 To clearly determine the nature of the noise, accelerate the car on the highway to...

Removal and installation the gearbox
Removal Before removing, drain the oil from the rear axle housing and, having lifted the rear of the car, place it on stands and remove the wheels. Unscrew the nuts securing the...

Disassembling the gearbox
To disassemble, secure the gearbox on a stand and remove the locking plates of the adjusting nuts, the differential case bearing caps, the adjusting nuts and the outer bearing...

Checking the technical condition of gearbox parts
Before inspecting the gearbox parts, wash them and then check whether the main gear teeth are damaged and whether the contact spots on the working surfaces of the teeth are...

Gearbox assembly
Differential assembly Install the axle shaft gears with support washers and satellites. Turn the satellites and axle shaft gears so as to align the axis of rotation of the...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More articles from other manuals on VAZ cars:
➠ Transmission: Rear axle VAZ-2107 (1982-2012)
➠ Transmission: Rear axle and shafts VAZ-21213 (1994-2006)
➠ Transmission: Rear axle VAZ-2101 (1970-1983)
➠ Transmission: Rear axle VAZ-2106 (1976-2006)

Share with friends: