Construction and repair of body elements VAZ-2105
The body of the VAZ-2105 car and its modifications
The body parts are stamped from low-carbon cold-rolled sheet steel: for external panels, 0.7 mm thick; for front floor and lid - 0.9 mm; for front mudguards, rear wheel arches,...
The body parts are stamped from low-carbon cold-rolled sheet steel: for external panels, 0.7 mm thick; for front floor and lid - 0.9 mm; for front mudguards, rear wheel arches,...
Possible bodywork faults
Possible body malfunctions, their causes and methods of elimination are indicated below.
Possible body malfunctions, their causes and methods of elimination are indicated below.
Checking and repairing the body frame and plumage
A significant portion of repair work is carried out on damaged vehicles, which in most cases require checking the geometry of the attachment points of the vehicle chassis...
A significant portion of repair work is carried out on damaged vehicles, which in most cases require checking the geometry of the attachment points of the vehicle chassis...
Front Fender Replacement
For minor damage to the wing (minor dents, scratches, etc.), without removing the wing, perform straightening and painting work. After straightening, check the condition of the...
For minor damage to the wing (minor dents, scratches, etc.), without removing the wing, perform straightening and painting work. After straightening, check the condition of the...
Replacing the rear wing
Replace the wing as follows. Remove the taillight and bumper. Empty the luggage compartment, remove the rubber seal of the trunk lid and the fuel tank (if the right wing changes)...
Replace the wing as follows. Remove the taillight and bumper. Empty the luggage compartment, remove the rubber seal of the trunk lid and the fuel tank (if the right wing changes)...
Roof panel replacement
In most accidents with damage to the roof panel, it is necessary to replace it. To do this, remove the windshield and rear window, roof trim and its accessories. Place the new...
In most accidents with damage to the roof panel, it is necessary to replace it. To do this, remove the windshield and rear window, roof trim and its accessories. Place the new...
Replacing the rear panel
Replace with the rear wings removed. Use a thin chisel to cut the rear panel (Fig. 286) off the fuel tank floor, spare wheel floor, side members, panel reinforcement and remove...
Replace with the rear wings removed. Use a thin chisel to cut the rear panel (Fig. 286) off the fuel tank floor, spare wheel floor, side members, panel reinforcement and remove...
Replacement of the rear floor, fuel tank floor (spare wheel) and rear floor side members
Replace with the rear fenders, rear panel and rear panel reinforcement removed. Use a fine chisel to roughen the rear floor (Fig. 287). Use nippers to remove the remaining strips...
Replace with the rear fenders, rear panel and rear panel reinforcement removed. Use a fine chisel to roughen the rear floor (Fig. 287). Use nippers to remove the remaining strips...
Replacing door thresholds
Replace with front and rear fenders removed. Replace amplifier 2 (Fig. 289) only if there is deformation or through corrosion. Using a thin, sharp chisel, cut off panel 3 of the...
Replace with front and rear fenders removed. Replace amplifier 2 (Fig. 289) only if there is deformation or through corrosion. Using a thin, sharp chisel, cut off panel 3 of the...
Repair of deformed surfaces
Repair deformed surfaces by mechanical or thermal action on the metal, as well as by filling dents with quick-hardening plastics or solder. Straighten out the dented areas of the...
Repair deformed surfaces by mechanical or thermal action on the metal, as well as by filling dents with quick-hardening plastics or solder. Straighten out the dented areas of the...
Anti-corrosion protection of the body
The car body has a significant number of closed (hidden) cavities, cracks, which create favorable conditions for the occurrence and development of corrosion, as they are poorly...
The car body has a significant number of closed (hidden) cavities, cracks, which create favorable conditions for the occurrence and development of corrosion, as they are poorly...
Design differences and features of car body repair VAZ-2104
The VAZ-2104 body structurally retained most of the body parts of the VAZ-2105. It differs in the rear part (see fig. 1, b). The side and roof panels, rear fenders, and rear trim...
The VAZ-2104 body structurally retained most of the body parts of the VAZ-2105. It differs in the rear part (see fig. 1, b). The side and roof panels, rear fenders, and rear trim...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Share with friends:
- General information
- Operation and maintenance
- Power unit
- Engine repair
- Fuel system (carburetor)
- Fuel system (injector)
- Control system
- Cooling system
- Exhaust system
- Transmission
- Clutch
- Car gearbox
- Cardan gear
- Rear axle
- Chassis
- Front suspension
- Rear suspension
- Wheels and tires
- Steering
- Brake system
- Body
- Exterior
- Interior
- Doors and glass
- Ventilation and heating
- Electrical equipment
- Equipment and devices
- Headlights and lighting
- Engine electrics
- Electrical circuits
- General information
- Vehicle description
- Vehicle device
- Vehicle operation
- Maintenance
- Power unit
- Engine repair
- Cooling and lubrication system
- Supply system
- Transmission
- Clutch
- Car gearbox
- Cardan gear
- Rear axle
- Chassis
- Suspension and shock absorbers
- Steering
- Brake system
- Body
- Body elements
- Electrical equipment
- Engine electrics
- Equipment and devices
- General information
- Introduction to guide
- User manual
- Troubleshooting
- Power unit
- Engine repair
- Engine repair VAZ-2103
- Cooling system
- Lubrication system
- Power and exhaust system
- Fuel injection
- Transmission
- Clutch
- Car gearbox
- Cardan gear
- Rear axle
- Chassis
- Suspension and shock absorbers
- Steering
- Brake system
- Body
- Exterior
- Interior
- Doors and windows
- Electrical equipment
- Equipment and devices
- Engine electrics
- Ignition system
- Electrical circuits