Clutch and its drive repair VAZ-2104

All articles on the device, principle of operation and repair of clutch units and its drive for VAZ-2104 Zhiguli (station wagon) and their modifications.

Description of the clutch design
Clutch parts: 1 - flywheel; 2 - driven clutch disc; 3 - basket; 4 - release bearing with clutch; 5 - hydraulic reservoir; 6 - hose; 7 - master cylinder of the clutch release...

Clutch release hydraulic drive — checking and adjustment
1. Place the vehicle on an inspection pit or overpass (see " Preparing a car for maintenance and repair "). 2. In the car's interior, check the free travel of the clutch pedal,...

Clutch Release Hydraulic Drive — Checking Fluid Level
The level of the working fluid in the reservoir should be at the lower edge of its filler neck. In the clutch hydraulic drive, the working (brake) fluid of class DOT-4 should be...

Clutch release hydraulic drive — fluid replacement and bleeding
To complete the job, you will need an assistant, as well as a container and a hose to drain the liquid. 1. Place the vehicle on an inspection pit or overpass (see " Preparing a...

Clutch release hydraulic reservoir — removal and installation
Removal 1. Prepare the vehicle for operations (see " Preparing a car for maintenance and repair "). 2. Using a rubber bulb, remove liquid from the tank. 3. Key by 10 mm we unscrew...

Clutch release hydraulic master cylinder — removal and installation
Removal 1. Place the vehicle on an inspection pit or overpass (see " Preparing a car for maintenance and repair "). 2. Using a rubber bulb, remove fluid from the clutch hydraulic...

Clutch release hydraulic drive slave cylinder — removal and installation
Removal 1. Place the vehicle on an inspection pit or overpass (see " Preparing a car for maintenance and repair "). 2. Drain the fluid from the clutch hydraulic drive (see "...

Clutch release hydraulic hose — removal and installation
Removal 1. Place the vehicle on an inspection pit or overpass (see " Preparing a car for maintenance and repair "). 2. Drain the fluid from the clutch release hydraulic drive (see...

Clutch parts — removal and installation
A centering mandrel is required for this job. Removal 1. Place the vehicle on an inspection pit or overpass (see " Preparing a car for maintenance and repair "). 2. Remove the...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More articles from other manuals on VAZ cars:
➠ Transmission: Clutch VAZ-2114 (2004-2013)
➠ Transmission: Clutch and drive shafts VAZ-11113 (1996-2003)
➠ Transmission: Clutch VAZ-2107 (1982-2012)
➠ Transmission: Clutch VAZ-21011 (1974-1983)
➠ Transmission: Clutch VAZ-2121 (1977-1994)

Share with friends: