All articles on the device and repair of gearbox units of VAZ-2105 Zhiguli cars.
Gear box device Since 1987, on all manufactured models, gearboxes have been unified in terms of gear ratios and have the same design. Gearboxes differ in speedometer drives, each of which...
Removing the gearbox Install the car over the inspection ditch (or on a lift), chock the front wheels and jack up the rear axle on one or both sides. Release the parking brake and place the shift...
Gearbox disassembly Before dismantling, wash the box with detergents, install it on the stand, drain the oil and remove the bottom cover with the gasket. Remove plug 11 ( see fig. 110 ) clutch...
Determining the technical condition of gearbox parts Before inspecting the gearbox parts, thoroughly clean with a brush or scraper, remove all deposits and clean the holes and splines from contamination. Then rinse to remove any...
Gearbox Assembly Assemble the gearbox in the reverse order of disassembly, taking into account the following: the spring of the reverse fork rod retainer differs from others in elasticity, it is...
Installing the gearbox Install the transmission to the vehicle in the reverse order of removal. Before installation, apply a thin layer of grease LSTs-15 or LITOL-24 on the splines of the input shaft...
Features of the device and repair of a five-speed gearbox The five-speed gearbox is based on the existing four-speed gearbox. The fifth gear is located in the cavity of the rear cover 24 (pic. 122), so its shape has changed. On the back...
Disassembly of the five-speed gearbox Set the gearshift lever to the neutral position, unscrew the nuts securing the gear selector mechanism and remove the gearshift lever assembly with the mechanism. Loosen the nuts...
Assembling a five-speed gearbox Assemble V gear and reverse gear, gear selection mechanism in the reverse order of disassembly, taking into account the following: fasten the axis of the intermediate reverse gear...