Contents: Removal ↓ Installation ↓
Removal
1. Prepare the car for work (see "Preparing the car for maintenance and repair").
2. Remove the wheel (see "Wheel - replacement").
3. Remove the hose from the shock absorber bracket (see above, "Front Brake Hose - Replacement").
4. Through the inspection hole in the caliper bracket, slightly move the brake pads apart so that they move away from the brake disc.
5. Loosen the lower end of the hose (see above, "Front Brake Hose - Replacement").
6. With a socket wrench by 17 mm we unscrew the two bolts that secure the caliper to the steering knuckle.
7. Remove the caliper assembly.
Warning: Do not press the brake pedal with the brake caliper removed.
8. Rotate the caliper, unscrew the lower end of the brake hose from it and remove the caliper from the car.
[The article is taken from the website: www.vazbook.ru]
Installation
1. Install the caliper in the reverse order, replacing the brake hose sealing ring with a new one.
2. Remove air from the brake hydraulic system (see "Hydraulic brake drive - bleeding") and make sure that the connection between the hose tip and the caliper is tight.