Table 10.2.1. Front wheel alignment angles under 320 kg load
|
Front wheel alignment |
-0°30' - +0°30' |
|
Front wheel alignment, mm |
-1 - +1 |
|
Longitudinal tilt of the wheel pivot axis |
1°-2° |
Table 10.2.2. Front wheel alignment angles for a loaded vehicle
|
Front wheel alignment |
0-1° |
|
Front wheel alignment, mm |
0,5-2,5 |
|
Longitudinal tilt of the wheel pivot axis |
1-2° |
Table 10.2.3. Tightening torques for threaded connections
|
Name of units and parts |
Thread |
Tightening torque, Nm (kgf·m) |
|
Wheel mounting bolts |
M12x1.25 |
65,2-92,6 (6,7-9,5) |
|
Front wheel hub bearing nut |
M20x1.5 |
225,6-247,2 (23-25,2) |
|
Bolts for fastening the ball joint to the steering knuckle |
M10x1.25 |
49,0 -61,7 (5,0-6,3) |
|
Nut securing the ball joint to the lever |
M12x1.25 |
66,6-82,3 (6,8-8,4) |
|
Adjusting bolt nut (with an eccentric) front suspension struts |
M12x1.25 |
77,5-96,1 (7,9-9,8) |
|
Nut of the bolt securing the front suspension strut to the steering knuckle |
M12x1.25 |
77,5-96,1 (7,9-9,8) |
|
Front suspension strut rod mounting nuts to upper support |
M14x1.5 |
65,9-81,2 (6,7-8,3) |
|
Nuts securing the upper support of the front suspension strut to the body |
M8 |
19,6-24,2 (2-2,5) |
|
Nut of the bolt securing the front suspension arm to the body |
M12x1.25 |
77,5-96,1 (7,9-9,8) |
|
Front suspension strut mounting nuts |
M16x1.25 |
160-176,4 (16,3-18) |
|
Stretch Bracket Mounting Bolts |
M10x1.25 |
42,1-52,0 (4,3-5,3) |
|
Nut of the bolt securing the stabilizer bar to the front suspension arm |
M10x1.25 |
42,1-52,0 (4,3-5,3) |
|
Nuts securing the anti-roll bar to the body |
M8 |
19,6-24,2 (2-2,5) |
|
Nut of the lower shock absorber mounting bolt to the rear suspension arm |
M12x1.25 |
66,6-82,3 (6,8-8,4) |
(The text is copied from the online resource: «VazBook.ru»)