You will need: screwdriver, pliers.
1. Remove the right wing molding (see «Removal and installation of moldings»).
2. Remove the piston fastening the front decorative sill to the wing.
3. Turn out five top and three bottom screws of fastening of a forward overlay to a threshold …
4.... and remove the trim.
5. Turn out three screws of fastening of a back overlay to a threshold.
6. Turn out the screw of fastening of a back overlay to the lower part of a threshold …
7.... remove the piston securing the sill to the side of the body..
8.... and remove the trim.
9. Similarly remove facing overlays of a threshold from the left side of a body.
10. Establish the removed facing slips of thresholds of a body in an order, the return to removal. If necessary, replace the caps for fastening the facing plates.