1. Remove the front fenders (see «Removal and installation of forward fender liner»).
2. Remove both fog lights (see «Fog Lamp Replacement»).
3. Turn out two bolts of fastening of a forward license plate and remove it.
4. Turn out two bolts of fastening of facing of a bumper to the amplifier, holding nuts of bolts from the inside with the second key.
5. Turn off two nuts of fastening to a mudguard of a body of the left …
6.... and right bumper trim brackets.
7. Gently pull the side part of the lining to the side and remove the studs of the bumper lining from the holes in the mudguard.
8. Holding the bumper lining, similarly remove the bumper lining mounting studs from the holes in the mudguard of the body on the opposite side..
9.... and remove the lining.
10. Turn off two nuts of fastening of a beam of a bumper to arms of a body …
11.... and remove the beam.
12. If necessary, remove the right and left front bumper mounting brackets, to do this, remove two bolts each and unscrew the nuts securing the brackets to the body.
Note. Pay attention to the fact that the bracket of the ambient air temperature sensor is additionally attached with the left bracket fastening nut.
13. Establish the removed details of a forward bumper in an order, the return to removal.