1. Install the car on a lift, remove the front left wheel bolts, raise the car and remove the wheel.
2. Remove the two screws securing the front fender liner to the bottom of the mudguard.
3. Turn away a nut of fastening of a back part of a fender liner to a body and remove a pressure plate.
4. Remove the three screws securing the fender liner to the bottom of the front buffer.
5. Remove the screw securing the fender liner to the bottom of the mudguard..
6.... two screws securing the fender liner to the top of the mudguard..
7.... and remove the fender liner.
8. Install the fender liner in the reverse order of removal.
9. Remove and install the right fender liner in the same way, paying attention to the condition of the anti-corrosion coating of the body under the fender liner. Re-process body parts if necessary.
Helpful advice. To protect threaded connections from corrosion, we recommend using autoplasticine, which is applied to the open threaded part of the bolt.