Fuses and fuses (VAZ-2107)

The fuses are installed in the mounting block (Fig. 71). The mounting block is closed at the top with a transparent cover, on which symbols are applied indicating the purpose of the relay and the circuits protected by the fuses. The transparent cover allows visual monitoring of the fuse status without removing it.

Fig. 71. Mounting block:
1 - fuse; 2 - Spare fuse socket; 3 - relay.

There is also another 8A fuse located on the wiring harness that goes to the rear fog light switch (pos. 18 fig. 4). This fuse protects the rear fog light circuits.

Before replacing a blown fuse, find out and eliminate the cause that caused it to melt. A blown fuse may only be replaced with one that is similar in terms of protective characteristics.

It is not permitted to operate the mounting block with a damaged transparent cover or housing.

[The original can be found on the website: VazBook.ru]

The circuits protected by fuses are shown in Table 7.

Fuses do not protect the ignition, engine start, or generator circuits (except for the excitation winding), low beam headlight relay, high beam headlight relay.