Attention! Generator, ignition, engine start circuits (battery, starter, etc.), the headlight relay and central locking relay are not fused.
Attention! Depending on the year of manufacture, one of two blocks can be installed on the car. Blocks of different years of manufacture have fuses of different types.
Attention! Always carry a set of spare fuses with you.
Attention! Do not replace fuses with jumpers or fuses of a different amperage rating. This will lead to the failure of the electrical devices of the car.
1. Most of your car's electrical circuits are protected by fuses. The fuse box is located at the rear of the engine compartment on the driver's side. The fuse numbers and current in amps are marked on the inside of the block cover.
2. New fuse box. The numbers of the fuses, the devices of the circuits they protect, as well as the current strength are given in the table.
Each block has its own fuses.
The amount of current in amps for which the fuses are designed is indicated on the fuse case.
3. Early release fuse block.
4. The numbers of the fuses of the early years of production, the devices of the circuits they protect, as well as the current strength are shown in the table.
5. Press the latches on both sides of the cover and remove it.
6. To remove the fuses from the block, use the tweezers that are fixed in the block.
7. Grab the fuse with tweezers and remove it.
8. Broken fuse. The fuse thread is blown.
9. Spare fuses are installed at the front of the unit.
10. To install a fuse, insert it into the socket and press until it locks into place.
11. On the left side, under the instrument panel, an additional 8 A fuse is installed on the wires, protecting the rear fog lamp circuit.
No. of pr-la | Current strength, A | Protected circuit devices |
F9 | 7,5 | Right fog lamp |
F8 | 7,5 | Left fog lamp |
F1 | 10 | Headlamp cleaner motors (at the moment of switching on) |
F7 | 30 | Headlamp cleaner motors (in operation) |
F16 | 15 | Direction indicators, relay-interrupter of direction indicators and alarms (in turn guidance mode) |
F16 | 15 | Oil pressure warning lamp |
F3 | 10 | Rear lights (brake light bulbs) |
F6 | 30 | Power window motor, power window relay |
F10 | 7,5 | License plate lights |
F5 | 20 | Radiator cooling fan motor and relay for its activation (contacts) |
F11 | 7,5 | Right headlight (side light) Right rear light (side light) |
F2 | 10 | Direction indicators, relay-interrupter of direction indicators and alarms (in alarm mode) |
F4 | 20 | Heated rear window heating element |
F15 | 7,5 | Right headlight (high beam) |
F14 | 7,5 | Left headlight (high beam) |
F13 | 7,5 | Left headlight (dipped beam) |
F12 | 7,5 | Right headlight (dipped beam) |
1 | 8 | Spare |
2 | 8 | Spare |
3 | 8 | Headlight cleaning motors at the moment of switching on) |
4 | 16 | Headlamp cleaner motors (in operation) |
5 | 8 | Direction indicators, relay-interrupter of direction indicators and alarms (in turn guidance mode) |
6 | 8 | Rear lights (brake light bulbs) |
7 | 8 | License plate lights |
8 | 16 | Radiator cooling fan motor and relay for its activation (contacts) |
9 | 8 | Left headlight (side light) |
10 | 8 | Right headlight (side light) |
11 | 8 | Direction indicators, alarm relay-breaker (in alarm mode) |
12 | 16 | Heated rear window heating element |
13 | 8 | Right headlight (high beam) |
14 | 8 | Left headlight (high beam) |
15 | 8 | Left headlight (dipped beam) |
16 | 8 | Right headlight (dipped beam) |