Removal
1. Prepare the car for work (see "Preparing the car for maintenance and repair").
2. Unscrew the nut of the bolt securing the stabilizer bar to the lower arm of the front suspension (see above, "Anti-roll bar - replacement of struts") and knock the bolt out of the holes in the rack and lever.
Similarly, we remove the bolt connecting the stabilizer bar to the right suspension arm.
3. With a socket wrench by 13 mm using an extension, unscrew the two nuts securing the bracket of the left stabilizer bar cushion to the body.
Similarly, unscrew the nuts securing the bracket of the other stabilizer bar cushion to the body.
4. Remove the stabilizer bar assembly with the struts and cushions.
Disassembly
1. Remove the racks from the bar.
2. By any available means (marker, sticky tape) we mark the place where the cushions will be installed on the bar.
3. Remove the cushion from the bar, having first removed the stabilizer bar mounting bracket from it.
Installation
We install the stabilizer in the reverse order.
The information is posted on the portal: VAZBOOK
Tip: To make installation of the pads and stands easier, apply a soap solution to the bar.