- height-adjustable stand (screw or hydraulic jack);
- viewing hole or flyover.
Removing
1. We prepare the car for work (see "Preparing the car for maintenance and repair").
2. Install the height-adjustable stand (jack) under the gearbox housing.
3. socket wrench by 17 mm unscrew the two nuts securing the support to the body (1). On the stand, we lower the back of the power unit by 10-15 mm. key by 19 mm loosen two nuts (2) bolts securing the support bracket to the gearbox housing, holding the bolts (3) socket wrench of the same size.
4. We take out the bolts and remove the support.
Installation
Install the rear support in reverse order.