Table 9.2.1. Basic data for control, adjustment and maintenance
Transmission oil: |
GL-4 |
Recommended oils |
LADA TRANS KP, LUKOIL TM 4-12, NOVOIL TRANS KP, NORDIX SUPERTRANS, RHS TRANS KP, SLAVNEFT TM-4, TNK TRANS KP, TNK TRANS KP SUPER, TRANS KP-2, UTEK FORWARD, VALVOLINE DURABLEND GEAR OIL |
Refueling volume, l |
3,3 |
Drive gland dimensions (right* - 2108-2301034, 2110-2301034, 2110-2301034-01; left* - 2108-2301035, 2110-2301035, 2110-2301035-01), mm: |
|
external diameter |
57 |
inner diameter |
35 |
width |
9 |
Input shaft seal dimensions (2110-1701043), mm: |
|
external diameter |
45 |
inner diameter |
25 |
width |
9 |
Selector Rod Seal Dimensions (2108-1703042-01), mm: |
|
external diameter |
30 |
inner diameter |
16 |
width |
7 |
* The seals of the left and right drives are not interchangeable, as they have a different direction of the oil drain grooves.
Table 9.2.2. Tightening torques for threaded connections
Name of units and parts |
Thread |
Tightening torque, Nm (kgf·m) |
Threaded drain plug |
M22x1.5 |
28,7-46,3 (2,9-47) |
Reversing light switch |
M14x1.5 |
28,4-45,3 (2,9-4,6) |
Nut of fastening of the case of a drive of the sensor of speed |
M6 |
4,5-7,2 (11,7-18,6) |
Nuts for securing the gearbox to the clutch housing |
M8 |
15,7-25,5 (1,6-2,6) |
Bolt with a conical part of the hinge of the thrust drive gear |
M8 |
16,3-20,1 (1,7-2,1) |
Bolts of fastening of the case of the lever of a gear change |
M8 |
15,7-25,5 (1,6-2,6) |
Bolts of fastening of the mechanism of a gear change |
M6 |
6,4-10,3 (0,7-1,1) |
Nuts of collars of draft of a drive of a gear change |
M8 |
15,7-25,5 (1,6-2,6) |
Bolt of fastening of an axis of the lever of a gear change |
M6 |
11,7-18,6 (1,2-1,9) |