The replacement of the air filter element is regulated and is carried out every 30,000 km. The condition of the filter element depends on the operating conditions of the car: on more dusty and polluted roads, the element becomes clogged faster.
You will need a screwdriver.
1. Disconnect the wiring harness connector from the mass air flow sensor.
2. Remove the four screws securing the filter cover..
3. …lift the lid…
4.... and remove the filter element from it.
5. Install the new filter element into the housing, orienting it in the same way as the previous one was oriented (pay attention to the direction of the corrugation of the element).
6. Install the filter cover together with the filter element and screw in its fastening screws.
7. Connect the wiring harness to the mass air flow sensor.