Clutch and its drive repair VAZ-2112

All articles on the device, principle of operation and repair of clutch units and its drive of VAZ-2112 cars (Lada 112, hatchback) and their modifications.

Description of the clutch design
Clutch - dry, single-disk, permanently engaged, gap-free, with cable drive, designed to transmit torque from the engine crankshaft to the primary shaft of the gearbox with the...

Clutch — checking technical condition
Clutch in engaged position (with the pedal released) should not "slip" and transmit torque from the engine to the transmission without loss, and when the clutch pedal is pressed,...

Clutch release drive — adjustment
If the working stroke of the clutch pedal differs from that shown in the figure (see Fig. " Clutch " ), it is necessary to adjust the length of the cable. Sequence of execution 1....

Clutch cable — replacement
We replace the cable if it breaks, gets stuck in the sheath or is stretched excessively. Removal 1. For ease of work, remove the air filter (see " Air filter - removal and...

Clutch — replacement
Recommendation. When replacing the driven clutch disc, it is advisable to replace the pressure plate (basket) as well, even if there are no noticeable signs of wear on its working...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More articles from other manuals on VAZ cars:
➠ Transmission: Clutch VAZ-21213 (1994-2006)
➠ Transmission: Clutch VAZ-2106 (1976-2006)
➠ Transmission: Clutch VAZ-2107 (1982-2012)
➠ Transmission: Clutch VAZ-21011 (1974-1983)
➠ Transmission: Clutch VAZ-2109 (1984-1997)

Share with friends: