All articles about the device and disassembly / assembly of elements of doors and windows of VAZ-2112 (Lada 112, hatchback) and their modifications.
The outer part of the front door lock — replacement To complete the job, you will need an M8 threaded stud approximately 100 mm long and a wrench from a set of socket wrenches with a large cross tip. Advice. The key can be made...
Front door upholstery — removal and installation Comment. Operation is shown on a door equipped with a power window regulator. The text indicates the features of removing the upholstery from a door equipped with a mechanical...
Switch (larva) front door lock — removal and installation Removing 1. Remove the door trim (see " Front door upholstery - removal and installation "). 2. Remove the plastic film from the door. 3. Disconnect the switch rod end from the...
External front door handle — removal and installation Removing 1. Remove the door trim (see " Front door upholstery - removal and installation "). 2. Remove the plastic film from the door. 3. Disconnect the pull rod of the outer door...
Front door lock — removal, installation and adjustment Comment. The door lock consists of an inner and outer part. In the event of a malfunction of the outer part, it can be replaced without removing the door upholstery (see " The...
Front door window regulator — removal and installation Comment. The operation is shown on the example of a power window lifter. Features of removal and installation of a window regulator with a mechanical drive are specified in the...
Front door glass — removal and installation Removing 1. Disconnect the door glass bracket from the power window (see " Front door window regulator - removal and installation "). Raise the glass all the way up with your hand...
Front door opening limiter — removal and installation Removing 1. Remove the door trim (see " Front door upholstery - removal and installation "). 2. Remove the plastic film from the door. 3. Through a steel drift, we knock out the...
Front door — removal and installation Comment. The work is shown with partial disassembly of the door. If necessary, the door can be removed after dismantling all its elements (see relevant sections). Advice. When...
Tailgate upholstery — removal and installation Removing 1. We prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Using a Phillips screwdriver, unscrew the door lock button. 3. From the back of...
The external handle of a back door — removal and installation Removing 1. Remove the door trim (see above " Upholstery of a back door - removal and installation "). 2. Remove the plastic film from the door. 3. Disconnect the outer handle rod...
Rear door lock — removal, installation and adjustment Comment. The door lock consists of an inner and outer part. In the event of a malfunction of the outer part, it can be replaced without removing the door upholstery (see " The...
Rear door window regulator — removal and installation Comment. Power windows can be installed in the rear doors, similar to those installed in the front doors (see " Front door window regulator - removal and installation "). Removing...
Rear door glass — removal and installation Removing 1. Remove the door trim (see " Upholstery of a back door - removal and installation "). 2. Remove the power window (see above " Rear door window regulator - removal and...
Rear door opening limiter — removal and installation Removing 1. Remove the door trim (see " Upholstery of a back door - removal and installation "). 2. Remove the plastic film from the door. 3. Through a steel drift, we knock out...
Rear door — removal and installation Comment. The description of the work is given with partial disassembly of the door. If necessary, the door can be removed after dismantling all its elements. An assistant is...