Features of the clutch device Clutch assembly 1 - fitting for pumping; 2 - clutch pressure spring; 3 - stepped rivet pressure spring; 4 - pressure plate; 5 - driven disk; 6 - flywheel; 7 - clutch housing; 8 –...
Clutch Release Drive Adjustment The following adjustments are made in the clutch release actuator: a gap of 0.1–0.5 mm is set between the pusher and the master cylinder piston (see fig. Clutch pedal and master...
Pumping the clutch hydraulic drive Air in the clutch hydraulic drive is indicated by incomplete disengagement of the clutch, as well as «softness» clutch pedals. Removal of air from the hydraulic actuator 1. Clean...
Removal and installation of clutch Centering the clutch disc using mandrel A.70081 1 - flywheel; 2 - clutch assembly; 3 - mandrel А.70081 1. Remove the gearbox first (see subsection 7.2.2 ). Turn away bolts and...
Clutch control Clutch control 1 - thrust flange of the pressure spring; 2 - pressure diaphragm spring; 3 - pressure plate; 4 - ring Replacing the friction linings of the driven disk 1 - mandrel...
Checking the clutch master cylinder on the stand Leak test of the rear O-ring Scheme for checking the condition of the rear sealing ring for tightness 1 – main cylinder; 2 - vessel; 3 - adapter with a seal; 4 - manometer; 5 -...