All articles on the device and repair of mechanical gearbox units of VAZ-2112 cars (Lada 112, hatchback) and their modifications.
Gear box device The car is equipped with a mechanical, five-speed, two-shaft gearbox, combined with the main gear and differential in a common crankcase. It consists of three parts - clutch... There is 1 comment
Gearbox — checking the technical condition Before proceeding to check the technical condition, check the oil level in the gearbox (see below, " Gearbox - oil level check "). In a box operated with a low oil level in the...
Transmission — Checking the Oil Level We check the oil level in the gearbox during vehicle maintenance, as well as before each trip if oil leaks from the gearbox. The test is carried out with the engine off. Execution...
Gearbox — oil change We replace the gearbox oil after 75,000 km or after five years of operation, whichever comes first. Advice. It is better to change the oil immediately after the trip, while it is...
Jet thrust — removal and installation Removing 1. We prepare the car for work (see " Preparing the car for maintenance and repair "). 2. socket wrench by 13 mm and with a wrench of the same size, unscrew the two nuts...
Jet thrust — disassembly and assembly Disassembly 1. Remove jet thrust (see above, " Jet draft - removal and installation "). If it is planned to install the tie rod assembly on the car, mark the relative position of...
Gearshift drive — removal, installation and adjustment To perform the adjustment, you need: viewing hole or flyover; assistant; roulette. Removing 1. We prepare the car for work (see " Preparing the car for maintenance and repair ")....
Gearshift Drive — Disassembly and Assembly Disassembly 1. Remove the gearshift drive from the car (see " Gearshift drive - removal, installation and adjustment "). 2. Key by 13 mm unscrew the nut of the axle of the gear...
Front wheel drive oil seals — replacement A worn and damaged front wheel drive oil seal can be determined by an external inspection of the gearbox. During long-term operation of a car with a faulty oil seal, oil leaks...
Input shaft oil seal — replacement When the input shaft seal is worn, the oil from the gearbox enters the clutch housing. This can cause the clutch discs to become oily. A malfunction can be determined by the...
Gearbox — removal and installation Recommendation. The gearbox weighs more than 30 kg, so work with an assistant or using an adjustable stop or lifting device. Removing 1. Remove the engine mudguard (see " Mudguard...