Clutch and its drive repair VAZ-2110

All articles on the device, principle of operation and repair of clutch units and its drive of VAZ-2110 (Lada 110) cars and their modifications.

Clutch — description and device
The VAZ 2110, VAZ 2111, VAZ 2112 cars are equipped with a clutch - dry, single-disk, constantly engaged, gap-free, with a cable drive, designed to transmit torque from the engine...

Checking the technical condition of the clutch
Clutch in engaged position (with the pedal released) should not "slip" and transmit torque from the engine to the transmission without loss, and when the clutch pedal is pressed,...

Clutch release drive — adjustment
If the working stroke of the clutch pedal differs from that shown in the figure (see figure), it is necessary to adjust the length of the clutch cable. Sequence of work execution...

Clutch cable — removal and installation
We replace the clutch drive cable if it breaks, gets stuck in the casing or is stretched excessively. Removal 1. For ease of operation, remove the air filter (see points 1-6 " Air...

Slave and pressure plates of the clutch — replacement
To perform repair work on replacing the driven disk and clutch basket, you will need a mandrel for centering the driven disk of the clutch (see item 35 " Special tools and devices...

Clutch release drive components — removal and installation
Removal 1. Remove the gearbox from the car (see " Gearbox - removal and installation "). 2. Using a slotted screwdriver, remove the upper end of the spring from the protrusions of...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More articles from other manuals on VAZ cars:
➠ Transmission: Clutch and drive shafts VAZ-11113 (1996-2003)
➠ Transmission: Clutch VAZ-2106 (1976-2006)
➠ Transmission: Clutch VAZ-2107 (1982-2012)
➠ Transmission: Clutch VAZ-21011 (1974-1983)
➠ Transmission: Clutch VAZ-2121 (1977-1994)

Share with friends: