Car suspension and wheels VAZ-2110

All articles about the device and repair of the front and rear suspension, as well as wheels and tires of VAZ-2110 (Lada 110) cars and their modifications.

Front suspension of the car — device and description
The front suspension on VAZ 2110, VAZ 2111, VAZ 2112 cars is independent, with telescopic swivel struts, transverse levers, longitudinal lever braces and an anti-roll bar. The...

Ball joint of the rack — removal, installation, replacement
To perform repair work on removing, installing, replacing a ball joint on a VAZ 2110 car, you will need a puller for pressing out the pins of the ball joints. Removal 1. Prepare...

Front suspension strut (without steering knuckle) — removal and installation
To perform repair work on removing and installing the front suspension strut on a VAZ 2110, you will need a reliable support for the car. Removal Warning: The front struts are...

Front suspension strut — disassembly and assembly
To perform repair work on disassembling and assembling the front suspension strut on a VAZ 2110 car, you will need: spring clamps; special devices for disassembling the suspension...

Front wheel hub bearing — replacement (without removing the steering knuckle)
The car has a non-adjustable front wheel hub bearing. If there is play in the hub bearing, it must be replaced. To perform repair work on replacing the front wheel hub bearing,...

Front Suspension Wishbone — Removal and Installation
To perform repair work on removing and installing the front suspension wishbone on a vehicle, you will need: pit or overpass (desirable); beard. Removal 1. Prepare the car for...

Front Suspension Wishbone — Silent Block Replacement
Silent blocks (rubber-metal hinges) we replace it when the hinge in the lever rotates, elasticity is lost, the rubber element of the silent block is chipped or squeezed out of the...

Longitudinal stretch of the front suspension — removal, installation, replacement
To perform repair work on removing and installing the longitudinal strut of the front suspension, you will need a pit or overpass. Removal 1. Remove the transverse suspension arm...

Front suspension crossmember — removal, installation, replacement
Removal 1. Remove the engine protection (see " Engine protection - removal and installation "). 2. Unscrew the bolt securing the lower suspension rod of the power unit to the...

Anti-roll bar — removal and installation
To perform repair work on removing, installing, replacing the stabilizer cushions and struts, you will need an inspection pit or overpass. Removal 1. Prepare the car for work (see...

Rear suspension — design and description
The rear suspension of VAZ 2110, VAZ 2111, VAZ 2112 cars is made on an "elastic" beam with cylindrical springs and telescopic shock absorbers* of double action. The rear...

Shock absorber and spring of rear suspension — removal, installation, replacement
Note. It is convenient to perform the work on removing, installing, replacing the shock absorber and spring of the rear suspension in an inspection pit. But if necessary, you can...

Rear Wheel Hub Bearing — Replacement
To perform repair work on replacing the rear wheel hub bearing, you will need: three-and two-grip pullers (see point 12 " Special tools and devices "); sliding forceps for...

Wheels and tires — description and device
On VAZ 2110, VAZ 2111, VAZ 2112 cars with a sixteen-valve engine, the manufacturer installs steel wheels (disks) for tubeless tires 5Jxl4H2 ET 35*, where: 5 - rim width in inches;...

Wheels and tires — technical condition check
To perform repair work, you will need a caliper with a depth gauge. Sequence of execution of the check 1. Before each trip, carefully inspect the wheels of the car and their...

Tires — Checking Pressure
The air pressure in a car tire is not constant. When the ambient temperature rises, the pressure in the tire increases, and when it falls, it falls. With small fluctuations in the...

Wheel — replacement
To perform wheel replacement work you will need: "balloon" wrench or 17 mm socket wrench; jack; wheel chocks; jack pad (if the car is on loose ground). Wheel replacement sequence...

Tubeless tire — DIY repair
A quick repair of a tubeless tire can be done with a special repair kit that provides reliable sealing of the damaged area. However, it should be taken into account that such...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More articles from other manuals on VAZ cars:
➠ Chassis: Wheel suspension VAZ-21213 (1994-2006)
➠ Chassis: Car suspension VAZ-21011 (1974-1983)
➠ Chassis: Car suspension VAZ-2109 (1984-1997)
➠ Chassis: Suspension and shock absorbers VAZ-21051 (1979-2010)

Share with friends: