Technical information and characteristics about cars of the LADA 110 family (VAZ-2110, VAZ-2111 and VAZ-2112) - body dimensions, engine and mechanical data.
Engine 21083-80 and engine 2110 Carburetor 8-valve engines with index 21083-80 and index 2110 for the family «tenths» cars have differences in the configuration of basic parts. Part of the engines was produced...
Engine 2111 With distributed injection, 8-valve engine, index 2111. It is manufactured on a new assembly line and is equipped with a crankshaft 2112 with an increased counterweight. The seats...
Engine 2112 16-valve engine with distributed phased injection with an index of 2112. The crankshaft, connecting rod, piston pin and flywheel are unified and have indexes, like those of the...
Timing belts of the gas distribution mechanism The timing belt transmits rotation from the crankshaft to the distribution one for the timely intake of the combustible mixture and the timely release of exhaust gases. Used to...
Distributed injection without converter Consider what elements and systems a distributed injection consists of. The main element, as already mentioned, is a computer. In the literature, you can find their different...
Phased distributed injection with a converter The power supply system of a distributed injection with a converter differs from the previous system primarily by a computer (what it is, see below), converter and oxygen sensor...
Electric fuel pump The electric fuel pump is designed to create pressure in the fuel system and supply fuel through the fuel filter to the injector unit. The submerged electric fuel pump is quite...
Fuel and air filters The fuel fine filter of the fuel injection system is significantly different from the filters of other systems. Its task is not to let particles larger than 10 microns pass,...
Power system computer The computer collects information: about the position of the throttle; the speed of its movement; frequency of rotation of the crankshaft; air temperature and, if necessary, turns...
Engine parts lubrication system The lubrication system is designed to lubricate rubbing parts, to remove friction products, to protect engine parts from corrosion and to cool these parts. The lubrication system...
Engine cooling system As you can see, the purpose of the cooling system is to maintain the engine temperature within 100-105°C. Data on the temperature of the engine comes to the computer from the...
Vehicle electrical equipment Ignition system The ignition system consists of an ignition unit, an on-board computer, a speed sensor (provisions), crankshaft, knock sensor, damper, high voltage wires and spark...
Clutch characteristics Clutch «dozen» differs from the clutch of other models. Let's consider their differences. pressure (leading) the disc has an index of 2110 and its size has been increased from 190...
Gearbox Specifications The 2110 gearbox is different from its predecessors. For example, the clutch on it is increased, and we examined the enlarged details of the clutch itself above. The crankcase has...
Steering with tilt adjustment of the steering column Steering rack and pinion, mainly consists of the same parts as the steering «Samara». The features are as follows: the steering wheel is first on «dozens» a similar «Samara»....
Characteristics of the brake system Every car has many important details. But there are parts with which further movement is prohibited if this part fails on the way. This is the braking system. The life of the...
Vehicle suspension characteristics The main purpose of the suspension is to ensure the smooth running of the car, to make the control easy and obedient, while the movement of the car must be silent. Shock...
The interior of the car is a high level of comfort Car showrooms «tenth» families have a modern European design. The driver can easily find a comfortable position for landing using the adjustment of both the seats and the angle of...
Basic parameters and dimensions of cars * A part of cars with a fuel injection system is completed. ** At the same time, the vertical load on the ball of the towing device in a static state should be within 25-50 kg.
Main parameters and characteristics of the engine Vehicle fuel consumption car modification Engine model Equipment Fuel consumption in combined cycle, l/100 VAZ-21102, -2111, -21122 VAZ-2111 Euro 2 7,6 VAZ-21102, -2111, -21122...
Basic adjustment and control parameters Clearances in the valve drive mechanism when cold (18-20°С) engine (only for 8-valve engine), mm: for inlet valves - 0.2±0.05 for exhaust valves - 0.35±0.05 The gap between the...
Passport data of the car The model and number of the vehicle, engine model, weight data, spare part number, versions and equipment are indicated in the summary plate 2 of the factory data (pic. 66). The...
Fuels and lubricants Fuels and lubricants approved and recommended for operation of LADA 110, 111, 112 vehicles and their modifications. Table 1. Motor gasoline Engine model Brand of recommended...
Lamps used on the car No. p / p Name Lamp type 1 Headlight: - high beam lamp AKG12-55-2 (H1) - low beam lamp AKG12-55-2 (H1) - turn signal lamp A12-21-4 (PY21W) - side light lamp A12-5-2 (W5W) 2 fog...
List of items containing precious metals in cars Item number product name Location of precious metals Weight in grams gold silver palladium 2110-3801010-04 instrument cluster in semiconductors 0,00023 0,014016 2105-3747010-03...