1. Remove the instrument panel (see «Removal and installation of the instrument panel»).
2. Turn out screws of fastening of the top right air duct to the central …
3.... and to the side of the instrument panel..
4.... and remove the air duct.
5. Turn out the screw of fastening and remove the top left air duct.
6. Disconnect right..
7.... and the left side air ducts.
8. Turn out four screws of fastening of the central air duct to the panel of devices …
9.... and remove the air duct.
10. Turn out two screws of fastening of an overlay of the panel of devices located in a socket of a combination of devices …
11.... a screw from inside the instrument panel..
12.... two screws inside the glove box..
13.... and two screws located at the end of the instrument cluster.
14. Unbend the mounting plates of the instrument panel lining on the left..
15.... on the right side..
16.... and in the center of the instrument panel.
17. Remove an overlay of the panel of devices.
18. Turn out two screws of fastening of facing of the bottom ware box …
19.... and remove the lining.
20. Turn out screws of fastening..
21.... and disconnect the body of the upper glove box from the instrument panel trim.
22. Turn out four screws of fastening of loops of a cover of the top ware box …
23.... and disconnect the hinged cover from the instrument panel trim.
24. Remove the spring clips of the glove box cover hinges.
25. Establish the removed details of the panel of devices in an order, the return to removal.