Car suspension and shock absorber repair VAZ-21099

Front Suspension Telescopic Strut — Removal
Front suspension: 1 - telescopic stand; 2 - brace bracket; 3 - stretching; 4 - front suspension arm; 5 - ball joint of the lever; 6 - steering knuckle; 7-crossbar stabilizer bar;...

Front Suspension Telescopic Strut — Disassembly
Front suspension telescopic strut: 1 - spring; 2 - protective cover; 3 - upper spring cup; 4 - upper support of the rack; 5 - support compression stroke limiter; 6 - compression...

Front Suspension Telescopic Strut — Assembly
The protrusion of the lower spring cup. The protrusion of the upper spring cup. 1. Install the spring so that the end of its lower coil rests against the protrusion of the lower...

Front Suspension Telescopic Strut — Installation
1. Install the front suspension strut in the reverse order of removal. 2. Rock the car vigorously several times and tighten the threaded connections to the appropriate torques (...

Steering knuckle — removal
3. Brake the car with the parking brake and install the anti-rollback stops ("shoes") under the rear wheels. Lift the front part of the vehicle and place it on the supports....

Steering knuckle — installation
Note: Before assembly, thoroughly clean all parts from dirt. Attention! The hub nut is disposable. If the flange is jammed, replace it. Install the steering knuckle in the reverse...

Replacing the front wheel hub bearing
1. Remove the steering knuckle from the vehicle ( see subsection 6.1.5. ). 2. Press the hub out of the inner bearing race using a drift. The wheel hub has a double-row ball...

Replacing the anti-roll bar
Place the vehicle on a ditch or lift and support the front of the vehicle. Attention! Brake the car with the parking brake and install the anti-rollback stops ("shoes") under the...

Replacing the ball joint of the suspension arm
Brake the car with the parking brake and install the anti-rollback stops ("shoes") under the rear wheels. Loosen and tighten the wheel mounting bolts only with the vehicle on the...

Replacing the front suspension strut
Attention! If after replacing the strut the car starts to pull to one side while driving, contact a specialized workshop for diagnostics of the front suspension, be sure to inform...

Replacing the front suspension arm
1. Raise and support the front of the vehicle. Remove the wheel. Brake the car with the parking brake and install the anti-rollback stops ("shoes") under the rear wheels. Loosen...

Removal and installation the rear suspension shock absorber
1. Lower the rear seat back, remove the protective cap of the upper pillar mount, located under the rear shelf. 2. Loosen the upper strut mount nut while holding the shock...

Removal and installation the rear suspension beam assembly
It is more convenient to remove the rear axle on a lift. If it is not possible to install the car on a lift, carefully lift the rear of the car by installing a jack under the...

Replacing the rear wheel hub bearing
1. Remove the hub nut protective cap by prying it off with a screwdriver. 2. Loosen the hub nut and loosen its tightening. 3. Turn on the first gear and install the anti-recoil...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More articles from other manuals on VAZ cars:
➠ Chassis: Wheel suspension VAZ-21213 (1994-2006)
➠ Chassis: Suspension and wheels VAZ-2110 (1995-2007)
➠ Chassis: Car suspension VAZ-21011 (1974-1983)
➠ Chassis: Suspension and shock absorbers VAZ-21051 (1979-2010)

Share with friends: