Front bumper replacement Before the beginning: Raise the front of the vehicle for ease of operation. 1. Remove two nuts each side of the buffer to the brackets on the body on both sides of the car. 2....
Rear bumper replacement Before the beginning: Raise the rear of the vehicle for ease of operation. 1. Unscrew the two nuts of the side mounting of the buffer to the body on both sides of the car. 2....
Replacement of facing of a radiator Lower radiator cover. 1. Open the hood and unscrew the two screws securing the lining. 2. Pry off the plastic latch with a screwdriver. 3. Turn the lining towards you and remove...
Front fender replacement Note. To gain access to the front wing mount bolt, you can leave the front buffer in place. It is enough to unscrew the two nuts of the side fastening of the buffer and squeeze...
Removing and installing the hood 1. Adjustment buffer. 2. Safety hook. 3. Hood latch. 4. Wire engine compartment lamp. 5. Washer tee. 6. Washer hoses. 7. Engine compartment lamp. 8. Hood stop. Before the...
Hood adjustment 1. Open the hood. Loosen two bolts securing the hood to the hinges on each side. 2. Close the hood and install it so that the gaps between the hood and the fenders are equal on...
Hood lock adjustment 1 - latch spring; 2 - locknut; 3 - latch; 4 - safety hook; 5 - safety hook handle Notes: Signs that the latch needs to be adjusted are a hard hit when closing the hood and a...
Outside rear view mirror 1. Remove the mirror handle by pulling it towards you. 2. Gently wring out the edge and remove the decorative trim (see note). Note. The decorative overlay of a mirror fastens by...