Introduction to instructions VAZ-2108

General information about the car
Since 1984, the Volga Automobile Plant named after the 50th Anniversary of the USSR has begun a gradual transition from the production of various models of "Zhiguli" to the...

Technical characteristics of the car
General information Capacity - 5 Payload (weight of passengers and luggage), kg - 425 Own weight (a fully fueled and equipped vehicle without payload), kg - 900 Mass of the...

Features of the design of cars VAZ-21081, -21083, -2109, -21093
The basic model of the VAZ-2108 has two main modifications: VAZ-21081 and -21083. Both modifications differ from the basic model in engine displacement. The VAZ-21081 has an...

Features of the design of VAZ-21081 cars
This car is equipped with a model 21081 engine with a reduced piston stroke (60.6 mm). Cylinder block Compared to the 2108 engine, the height of the cylinder block is reduced by...

Features of the design of VAZ-21083 cars
The car is equipped with a 21083 engine with an increased cylinder diameter (82 mm). Therefore, there are features in the design and repair of the cylinder block, cylinder head...

Features of the design of VAZ-2109 cars
The VAZ-2109 differs from the VAZ-2108 in its five-door body and minor changes in the engine power supply system. Engine. Equipped with intake 2 ( figure 189 ) cold air, taking...

Microprocessor engine control system VAZ-21088-02
Features of the device The microprocessor engine management system (MEMS) is designed to control ignition (moment and energy of spark formation) and the electromagnetic valve of...

Methodology for troubleshooting the ignition system VAZ-21088-02
The main faults of the microprocessor engine control system are listed in Table 36. If the engine does not start or runs intermittently, it is recommended to start checking the...

Tightening torques for threaded connections
Tightening torques for threaded connections

Special tool for repair and maintenance
Special tool for repair and maintenance * Also applies to other VAZ models.

Fuels, lubricants and operating fluids used
Fuels, lubricants and operating fluids used Refueling or lubrication point Quantity, l Material Fuel tank 43 Automobile gasoline AI-93 Engine lubrication system (including oil...

Basic data for adjustments and control
Clearances in the valve drive mechanism on a cold (18-20°C) engine, mm: intake valves - 0.2±0.05 exhaust valves - 0.35±0.05 Minimum crankshaft speed, rpm — 750–800 Oil pressure in...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More articles from other manuals on VAZ cars:
➠ General information: Introduction to guide VAZ-21051 (1979-2010)
➠ General information: Introduction to the guide VAZ-11113 (1996-2003)

Share with friends: