Repair of car body elements VAZ-2109
Car body design
The body of the vehicles in question is of a load-bearing structure, all-metal, welded. The cars have a more spacious interior than the previous cars, although the length of the...
The body of the vehicles in question is of a load-bearing structure, all-metal, welded. The cars have a more spacious interior than the previous cars, although the length of the...
Body frame and plumage
The main elements (figure 136) the frame consists of the front, floor, side panels, roof with windshield frame, rear panel, and frame load-bearing elements (side members, cross...
The main elements (figure 136) the frame consists of the front, floor, side panels, roof with windshield frame, rear panel, and frame load-bearing elements (side members, cross...
Sealing and soundproofing of the body
Rubber seals are used to ensure the tightness of the body (figure 137) various profiles, sealing mastics, rubber plugs for technological holes, and also carefully adjust all...
Rubber seals are used to ensure the tightness of the body (figure 137) various profiles, sealing mastics, rubber plugs for technological holes, and also carefully adjust all...
Exterior and interior body finishing
The car's appearance differs from that of its predecessors in its wedge-shaped form, large angles of inclination of the windshield and rear windows, and a minimum number of chrome...
The car's appearance differs from that of its predecessors in its wedge-shaped form, large angles of inclination of the windshield and rear windows, and a minimum number of chrome...
Front doors of the car
Front doors (figure 138) the cars in question are hung on two hinges. The fixed links of the hinges are attached to the front pillar with bolts, the movable links are welded to...
Front doors (figure 138) the cars in question are hung on two hinges. The fixed links of the hinges are attached to the front pillar with bolts, the movable links are welded to...
Rear doors of the car
The rear doors of VAZ-2109, 21093 cars differ from the front doors in the dimensions and design of the outer and inner panels, as well as the dimensions of the door window...
The rear doors of VAZ-2109, 21093 cars differ from the front doors in the dimensions and design of the outer and inner panels, as well as the dimensions of the door window...
Car tailgate
The tailgate is interchangeable on all the cars in question. The door is hung on the rear roof beam with two hinges 3 (figure 142). Gaskets 2 and 4 are installed under the hinge...
The tailgate is interchangeable on all the cars in question. The door is hung on the rear roof beam with two hinges 3 (figure 142). Gaskets 2 and 4 are installed under the hinge...
Hood, bumpers, radiator grille
Hood Hood (figure 144) consists of external and internal panels made of 0.8 mm thick sheet steel. The panels are connected to each other by bending the flanges with glue....
Hood Hood (figure 144) consists of external and internal panels made of 0.8 mm thick sheet steel. The panels are connected to each other by bending the flanges with glue....
Body glazing
Windshield 2 (figure 147) 3 mm thick is made of two layers of glass that are glued together with a plastic film. It can also be tinted (light absorbing). In the body opening, the...
Windshield 2 (figure 147) 3 mm thick is made of two layers of glass that are glued together with a plastic film. It can also be tinted (light absorbing). In the body opening, the...
Windscreen and rear window washers
The windshield and rear window washers consist of a pressure pump 9 (figure 149) with an electric motor, a supply tank 7 with a capacity of 2 l, an electromagnetic valve 3 for the...
The windshield and rear window washers consist of a pressure pump 9 (figure 149) with an electric motor, a supply tank 7 with a capacity of 2 l, an electromagnetic valve 3 for the...
Instrument panel
Instrument panel (figure 151) is made of energy-absorbing material and consists of panel 10 itself, which is made of 3 mm thick Noril plastic, and overlay 11. The metal frame of...
Instrument panel (figure 151) is made of energy-absorbing material and consists of panel 10 itself, which is made of 3 mm thick Noril plastic, and overlay 11. The metal frame of...
Front seats of the car
The front seats are "anatomical", separate, like armchairs, with headrests, with stepless adjustment of the backrest tilt. Each seat is installed on two runners and a rocking...
The front seats are "anatomical", separate, like armchairs, with headrests, with stepless adjustment of the backrest tilt. Each seat is installed on two runners and a rocking...
Back seat of a car
The rear seat consists of a cushion and a backrest, the bases of which are made of sheet steel. Soft polyurethane foam padding is placed on the bases and covered with upholstery,...
The rear seat consists of a cushion and a backrest, the bases of which are made of sheet steel. Soft polyurethane foam padding is placed on the bases and covered with upholstery,...
Heating and ventilation of the passenger compartment
Heating of the passenger compartment is provided by air heated in the radiator 5 (figure 156) heater, which is included in the cooling system parallel to the main radiator. The...
Heating of the passenger compartment is provided by air heated in the radiator 5 (figure 156) heater, which is included in the cooling system parallel to the main radiator. The...
Body maintenance
After the first 2000 km of a new car, it is necessary: tighten the fastening of the body components and parts; check for chips, cracks and corrosion in the paintwork; check the...
After the first 2000 km of a new car, it is necessary: tighten the fastening of the body components and parts; check for chips, cracks and corrosion in the paintwork; check the...
Fastening of body parts and components, checking of locks, cleaning of drainage holes of doors and thresholds
Tighten the fastenings of the hood, front doors, tailgate, door and hood locks, seat runners and interior heater. It is also necessary to check all fastenings of units and...
Tighten the fastenings of the hood, front doors, tailgate, door and hood locks, seat runners and interior heater. It is also necessary to check all fastenings of units and...
Lubrication of body components and parts
Open the front and rear doors fully, lubricate the flat rods of the door opening limiters on both sides with USSA consistent grease. With the fuel tank filler cap open, lubricate...
Open the front and rear doors fully, lubricate the flat rods of the door opening limiters on both sides with USSA consistent grease. With the fuel tank filler cap open, lubricate...
Checking the condition and care of the paintwork
To keep the paintwork in good condition for a long time, you should select polishing compounds that match the condition of the coating. In this case, you must follow the...
To keep the paintwork in good condition for a long time, you should select polishing compounds that match the condition of the coating. In this case, you must follow the...
Restoration of the underbody coating and wheel arches
During the operation of the car, the anti-noise, anti-corrosion coating of the underbody is destroyed and worn away by exposure to gravel, sand, salt, and moisture. The exposed...
During the operation of the car, the anti-noise, anti-corrosion coating of the underbody is destroyed and worn away by exposure to gravel, sand, salt, and moisture. The exposed...
Anti-corrosion treatment of hidden cavities of the body
Due to the use of complex technological equipment and the difficulty of performing high-quality work, it is recommended that the treatment of hidden cavities be carried out only...
Due to the use of complex technological equipment and the difficulty of performing high-quality work, it is recommended that the treatment of hidden cavities be carried out only...
Main body faults
The front door does not lock. The cause of the malfunction may be the jamming of the moving parts of the lock due to dust. In this case, remove the door trim and the lock, wash...
The front door does not lock. The cause of the malfunction may be the jamming of the moving parts of the lock due to dust. In this case, remove the door trim and the lock, wash...
Main rolling bearings and seals
Main rolling bearings Name Designation VAZ GPZ Differential box bearing 2108-2303036 6U-7207A Steering shaft bearing 2108-3401120 — Steering gear pinion bearing: ballpoint...
Main rolling bearings Name Designation VAZ GPZ Differential box bearing 2108-2303036 6U-7207A Steering shaft bearing 2108-3401120 — Steering gear pinion bearing: ballpoint...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Share with friends:
- General information
- Specifications
- User manual
- Maintenance
- Car care
- Troubleshooting
- Power unit
- Engine repair
- Cooling and lubrication system
- Power and exhaust system
- Transmission
- Car gearbox
- Clutch and drive shafts
- Chassis
- Car suspension
- Steering
- Brake system
- Body
- Exterior
- Interior
- Doors and locks
- Electrical equipment
- Equipment and devices
- Lighting and signaling
- Engine electrics
- Ignition system
- General information
- Introduction to guide
- Power unit
- Engine repair
- Cooling and lubrication system
- Power and exhaust system
- Transmission
- Clutch and drive shafts
- Car gearbox
- Chassis
- Front suspension
- Rear suspension
- Steering
- Brake system
- Body
- Exterior
- Interior
- Doors and glass
- Electrical equipment
- Equipment and devices
- Engine electrics
- Ignition system