1. Disconnect the wiring harness from the turn signal.
2. Disconnect the wiring harness from the headlight.
3. Press the lock and turn the hydraulic corrector counterclockwise until it stops, then remove the hydraulic corrector from the headlight housing.
4. Unscrew the two mounting nuts on both sides and remove the headlight with the turn signal.
5. Unscrew the two mounting screws...
6....and remove the turn signal from the headlight.
Information taken from the website VazBook.ru
7. The headlights with the turn signal are installed in the reverse order. After installation, adjust the headlights.