Contents: Removal ↓ Installation ↓
Removal
1. Remove the instrument panel trim plug (see "Instrument panel - removal and installation").
2. Push the switch out through the resulting opening.
3. Disconnect the wiring harness connector from the switch.
(The material is posted on the online resource: vazbook.ru)
Recommendation: If you need to remove several switches at once, then to simplify assembly, you should mark the switch and the corresponding block with a marker.
4. Remove the remaining switches in the same way.
Installation
We install the switches in the reverse order, while connecting the wire blocks in accordance with the marks applied to them.
Note: If there are no marks on the wiring blocks, they must be connected in accordance with the vehicle's electrical diagram, using the color of the wires as a guide.