Contents: Removal ↓ Installation ↓
Removal
1. Prepare the vehicle for work and disconnect the wire terminal from the negative terminal of the battery (see "Preparing the car for maintenance and repair").
2. Remove the air filter housing (see "Air filter - removal and installation").
3. With a spanner by 13 mm we unscrew the nut securing the starter power cable tip.
4. Disconnect the wire connector from the traction relay terminal.
5. With a spanner by 15 mm or using a socket wrench with an extension, unscrew the three nuts securing the starter (the bottom nut is not visible, so you will have to unscrew it by touch).
6. Remove the starter from the engine compartment.
Installation
We install the starter in the reverse order.