1. Disconnect the wiring harness connector from the brake fluid level sensor.
2. From inside the passenger compartment, remove the retaining clip from the brake pedal pin.
3. Take out a finger of a pedal of a brake, having disconnected thereby a pusher of the vacuum amplifier from a pedal.
4. Disconnect the hose from the check valve, unscrew the two nuts securing the master brake cylinder to the vacuum booster and take it aside, being careful not to damage the pipelines.
5. Turn away four nuts of fastening of an arm and remove an arm with the vacuum amplifier.
6. Turn away two nuts of fastening and remove the vacuum amplifier from an arm.
7. Install the vacuum booster in the reverse order of removal.