Gear selection mechanism: 1 - housing of the gear selection mechanism; 2 - gear selection lever (forward); 3 - guide axis of the locking brackets; 4 – an axis of the lever of a choice of transfers; 5 - spring; 6 - retaining ring; 7 - axis of the reverse fork; 8, 13 - blocking brackets; 9 – a clamp of the lever of a choice of transfers; 10 – a fork of inclusion of a backing; 11 - gear selection lever (reversing); 12 - thrust sleeve
You will need: screwdriver, wrench «at 13».
1. To replace the levers and springs of the gear selection mechanism, remove the retaining ring from the guide shaft of the locking brackets.
2. Pull out the guide shaft of the locking brackets and remove the spring.
3. Turn away a nut of fastening of an axis of the lever of a choice of transfers.
4. Remove the shift lever and remove the spring.
5. Assemble the gear selection mechanism in the reverse order of disassembly.