Removing
1. We prepare the car for operations (see "Vehicle preparation for maintenance and repair").
2. Key on 10 mm loosen the terminal nut and remove the wire from the negative battery terminal.
3. Similarly, remove the wire from the positive terminal.
4. socket wrench at 13 mm with an extension, unscrew the nut securing the retaining bar and remove it.
5. Remove the battery from the engine compartment.
Installation
1. Before installing with a rag, we clean the surface of the battery from dirt and, if necessary, clean the battery terminals and the inner surfaces of the wire terminals from oxides (see "Battery - Maintenance").
Warning The diameter of the positive battery terminal is larger than the negative one. Reverse polarity when connecting the battery will damage the vehicle's electronic equipment.
2. Install the battery in reverse order.
3. After installation, lubricate the terminals and battery terminals with grease.