Contents: Removal ↓ Installation ↓
We replace the filter according to the maintenance schedule after 30,000 km of vehicle mileage.
Removal
1. Prepare the vehicle for operations (see "Preparing a car for maintenance and repair").
2. Relieve the pressure in the fuel system (see above, "Relieving pressure in the fuel system").
3. Disconnect the wire from the negative terminal of the battery (see "Battery - Removal and Installation").
4. Key by 17 mm unscrew the fuel pipe fitting, holding the filter with a wrench by 19 mm.
Warning! A small amount of gasoline may leak out. Place a rag underneath.
5. Disconnect the tube from the filter.
Two sealing rings are installed in the connections of the tubes with the filter.
6. Similarly, disconnect the other tube from the filter.
7. With a socket wrench by 10 mm we loosen the clamp bolt of the filter mount and remove it.
Installation
1. The filter is installed in the reverse order. The arrow on the filter body should point towards the fuel rail.
The information is published on the website VAZbook.ru
2. Replace the rings that seal the filter connections to the fuel pipes with new ones.
3. With the engine running, check the tightness of the filter connections with the tubes. If the tightness is broken, tighten the tube fittings.