Contents: Headlights ↓ Rear lights ↓ License plate lights ↓ Ceiling lamp ↓ Side direction indicators ↓
Headlights
1. Turn the casing 2 (see Fig. View of the headlight from the engine compartment) counterclockwise and remove it.
2. Remove the headlight bulb and the socket with the parking light bulb from the reflector.
3. To replace the turn signal bulb, remove the bulb holder from the headlight housing.
Rear lights
1. Loosen the mounting screws and remove the trunk trim.
2. After pressing the clamps, remove the printed circuit board with the lamps from the flashlight.
3. The lamps are removed from the sockets by lightly pressing on them and turning them counterclockwise.
License plate lights
1. The lights are located on the trunk lid. To replace the bulb, unscrew the light mounting screws.
2. Remove it from the socket and remove the diffuser.
Ceiling lamp
To replace the lamp, remove the lampshade diffuser by carefully prying it off with a screwdriver from the side opposite the switch.
Side direction indicators
To replace the bulb, remove the socket with the bulb from the inside of the wing.