Refueling is carried out when changing the coolant or after repairing the engine.
Carry out the refueling operations in the following order.
1. Remove the plugs from the radiator and from the expansion tank and open the heater cock
2. Pour coolant into the radiator, and then into the expansion tank, after inserting the radiator cap. Plug the expansion tank
3. Start the engine and let it idle for 1-2 minutes to remove air pockets.
4. After the engine has cooled down, check the coolant level. If the level is below normal, and there are no signs of leakage in the cooling system, add fluid.