You will need: AC12-5 lamp.
License plate lights.
License plate lamp AS12-5.
1. Open the trunk lid. Use a thin screwdriver to press the lamp to the left and remove it.
2. Disconnect the wires from the lamp.
3. Carefully remove the rubber boot.
4. Use a thin screwdriver to press the contacts and remove the lamp.
5. Insert a new lamp.
6. Put the cover on the flashlight, passing the contacts, latch and hook through the hole in the cover.
7. Connect wires. Insert the lantern hook into the smaller slot first...
8....then press the other side of the light until it clicks.