Contents: Removal ↓ Installation ↓
Warning! Before performing work, read the precautions for repairing the engine management system (see "Precautions when repairing the engine management system").
Removal
1. Prepare the vehicle for work and disconnect the wire terminal from the negative terminal of the battery (see "Preparing the car for maintenance and repair").
2. Remove the right trim of the center console (see "Instrument panel - removal and installation").
3. With a socket wrench by 10 mm loosen the two nuts securing the ECU.
4. By moving it forward, we remove the plastic bracket of the ECU from engagement with the studs of the bracket of the electronic units and remove the ECU from under the console.
5. Having released the lock of the wiring harness connector, we disconnect the connector from the ECU.
6. With a socket wrench by 10 mm unscrew the four bolts securing the ECU to the bracket.
7. Remove the ECU from the bracket.
Installation
We install the electronic unit in the reverse order.