Warning! When removing the door upholstery, there is a high probability of breakage of its plastic holders, so stock up on a sufficient number of new holders before starting work.
Removing
1. We prepare the car for work (see "Preparing the car for maintenance and repair").
2. Using a slotted screwdriver, we press the socket from the lining...
...and remove the outlet.
3. Remove the handle and its lining.
4. Prying with a slotted screwdriver, remove the decorative trim on the door handle.
5. Using a Phillips screwdriver, unscrew the two screws securing the handle and remove it.
6. Prying with a slotted screwdriver, remove the lining of the inner handle of the door lock.
7. Phillips screwdriver (or hand) unscrew the door lock button.
8. Using a stripper for upholstery holders or a slotted screwdriver, inserting them between the upholstery and the door, take out ten upholstery holders one by one from the door openings (for clarity, the location of the holders is shown on the removed door trim).
9. Remove the upholstery from the door.
Installation
Install upholstery in reverse order.