Removing
1. We prepare the car for work (see "Preparing the car for maintenance and repair").
2. Remove the inner handle of the door lock with a rod (see "Front door lock - removal, installation and adjustment").
3. We lower the glass until the glass mounting bolts are opposite the hole in the amplifier.
4. socket wrench by 10 mm unscrew the two bolts securing the glass to the window lifter.
5. Raise the glass to the top position and fix it in any way possible (tape, screwdriver).
6. We cut the insulating tape of the wiring harness.
7. Disconnect the wiring harness block of the power window gear motor.
8. socket wrench by 10 mm unscrew the seven nuts securing the power window to the door amplifier.
9. Remove the power window from the door.
Installation
Install the window regulator in reverse order, lubricating the window regulator guide with grease.