Contents: Removal ↓ Installation ↓
Removal
1. Prepare the car for work (see "Preparing the car for maintenance and repair").
2. Remove the door trim (see "Front door trim - removal and installation").
Warning! Without the door stop, the door opens too wide and can damage the front fender and dent itself.
3. Using a hammer and a punch, knock out the stopper pin.
4. With a socket wrench by 8 mm we unscrew the two bolts securing the limiter.
5. Remove the limiter from the inner cavity of the door.
Installation
1. Install the limiter in the reverse order, holding the door and not allowing it to rest against other parts of the body.
2. Apply SHRUS-4 or similar grease to the limiter rod.