You will need: Key «for 8», a container for draining liquid.
Recommendation: Before starting work, remove the rear luggage rack.
Warning: Always make sure that the level in the washer reservoir is sufficient. Do not allow the liquid level to fall below the reservoir fitting - the washer pump motor may fail.
To add fluid, open the cap of the washer reservoir...
... insert a funnel into the filler neck of the tank and add liquid to its lower edge.
If it is necessary to drain the liquid from the tank, unscrew the two bolts securing the tank bracket to the body and...
... remove the tank with the bracket.
Substitute a suitable container, open the tank lid and drain the liquid from it.