Removing
1. We prepare the car for work (see "Preparing the car for maintenance and repair").
2. Remove the air filter (see "Air filter - removal and installation").
3. Cut the clamp securing the throttle cable to the engine radiator fan housing.
4. Disconnect the electric fan wiring harness pads.
5. Disconnect the harness holder from the fan shroud.
6. Ring wrench by 10 mm unscrew the nut of the lower fastening of the electric fan (bottom view for clarity)...
...and the top fixing nut of the electric fan (2). socket head by 8 mm unscrew the two nuts of the radiator bracket (1).
7. Remove the radiator mounting bracket.
8. socket wrench by 10 mm unscrew the two bolts securing the electric fan on the left side.
9. Carefully remove the electric fan from the engine compartment.
Disassembly
1. Prying with a screwdriver, disconnect the wiring harness from the casing. Remove the cover from the electric fan.
2. socket wrench by 10 mm unscrew the three nuts securing the motor to the casing.
3. We remove the electric motor from the casing.
Assembly
We assemble the electric fan in the reverse order.
Installation
Install the fan in the reverse order of removal.