1. Remove the front door trim (see "Removal and installation the front door trim").
2. Remove the window lift mechanism (see "Replacing the front door window regulator").
3. Remove the lower inner and outer glass seals. Then use a screwdriver to remove the protective film holders and remove the film from the door.
4. Remove the upper glass seal.
5. Turn the glass and remove it upwards.
Note: The glass is removed in this position.
6. Check the tightness of the glass fit in the frame. If the frame is not tightly installed on the glass, mark the position of the frame relative to the lowering glass and remove the frame.
7. Place a strip of raw rubber on the sliding glass (soaking it in gasoline), the size of which exceeds the size of the frame of the drop glass by 2–3 mm, and, having previously squeezed the frame with pliers, carefully, so as not to damage the glass, install the drop glass with the sealing rubber into the frame.
8. Install the lowering glass assembly with the frame and all removed parts in the reverse order of removal.
The material is posted on the online resource VAZBOOK.ru