- keys "for 8", "on 10"
- screwdriver
Remove door trim (see subsection 9.6.1.).
1. Remove the protective film from the inside of the door.
2. Install the power window handle and lower the glass down.
3. Carefully pry out the inner window seal with a screwdriver (place a soft material under the screwdriver) And...
4....remove the seal.
5. Carefully pry out the outer window seal with a screwdriver (place a soft material under the screwdriver) And...
6....remove the seal.
7. Loosen the windshield guide bolt and...
8....lower the guide down.
9. Outline the sliding glass cage mounting bolts (to install it in the same place during assembly).
10. Remove the two bolts securing the sliding glass cage to the power window movable bracket.
11. Raise the rear edge of the glass and, having brought it out through the upper slot, remove the glass from the door.
12. If the new glass is without a casing, mark the position of the glass relative to the edge of the casing and transfer the mark to the new glass. Install raw rubber on new glass (after wiping it with gasoline) and pliers carefully, so as not to crush the glass, crimp the glass holder.
13. Establish new glass in gathering with a holder and other details in an order, the return to removal.