1. Remove the front door trim (see "Removal and installation the front door trim").
2. Disconnect the front door window regulator wiring harness connector.
3. Unscrew the three nuts securing the window lift mechanism to the inner door panel.
4. Remove the two bolts securing the window lowering frame to the window lifter slider.
5. Carefully lift the sliding glass upwards and fix it in the upper position.
6. Remove the two screws securing the inner door lock handle to the body panel.
7. To access the drive rod mount to the inside door lock handle, bring the handle and drive rod out through the window in the panel.
8. Remove the rubber rod holder…
9. …and disconnect the inner handle from the rod.
10. Remove the window regulator from the inner door panel window.
11. Install the window regulator in the reverse order of removal.